Fire Extinguishing Ball

FIRE EXTINGUISHING BALL.

Fire extinguisher ball is the most advanced product if fire-proof industry to reduce the disaster nd any irreplaceable loss caused by fire.

Fire extinguisher ball is light and portable, which could extinguish the initial fire. It is made of the water-proof plastic shell and filled with harmless environmental powder(91/155EEC), All of them are conform with international environmental protection, standard.

FIRE BALL WORKING (Click for the video)

#5 advantages which shall be considered:-

i) Light weight, only 1.3 kilograms, shape of a ball even the old and children can can use it easily.

ii) As long as simply roll out to fire scenes or set in the places easy on fire such as the electric case, the gas barrel, flammable chemical articles in the factory, shopping mall, gas station, hotel, or even in the car.

iii) As long as been touched for 3-5 seconds by flame reaching 70°C, A.F.O will automatically extinguish the fire effectively and rapidly.

iv) You don't need to be close to fire scenes to extinguish the fire any more. A.F.O is made of totally harmless material to the environment and safe for users: the exploding power has been accurately calculated to be approved safe.

V) A.F.O, it can be always at your service to extinguish the fire and no need to do regular inspection yearly. The product life span is 5 years, and the decibel when extinguishing the fire can be a fire alarm to warn people in the fires scenes.

"(CLICK) Demonstration"

Procedure to use:-

. 1) Place the fire ball in which the flame occur easily, such as the upside of circuit box, gas can and range, super market, hotel, gas station or cars.

2) Fix Height: 30cm away from the possible fire source, the effective area is 3 cubic meters.

3) Recommends quantity: To achieve the best protection, we kindly suggest placing 2 balls in the same location.

4) Fix the bracket on the wall and place the ball with the blue arrow directed downward

5) Onc touching with the fire, the ball would explode nd extinguish the fire effectively within 3 to 5 seconds.

6) New and advanced technology from German, harmless to the humanity and the environment, safe explosive range.

Disadvantages of fire extinguishing balls:-

• It requires a confined place for the effectiveness.

•It is not capable to cover the large areas.

•It is mostly found at the entrance of the hazardous area or room.

•It may sometimes fails to extinguish the fire completely hence can re-ignite and burn up.

•It may hinder the visibility for a while.

Comments

(B.L.E.V.E) Boiling Liquid Expansion Vapour Explosion & UVCE Explosion.

👉B.L.E.V.E. (Boiling Liquid Expanding Vapour Explosion). A BLEVE (Boiling Liquid Expanding Vapour Explosion) is experienced when containers of liquefied gases, are exposed to fires. It results from the failure of a vessel containing a liquid or a liquefied gas at a temperature significantly above its boiling point at normal atmospheric pressure. In case of container failure, a large fraction of the superheated liquid flashes to vapour, resulting in the sudden generation of a large amount of flammable gas. " CLICK:- Everything about BLEVE " Considering the large amount of liquefied gases which are in use both in the industry and society, the risk of BLEVEs is high, as is also evident from large number of instances of BLEVEs, both within and outside industrial premises. Amongst the most dangerous of such explosions are the rupture of liquefied gas containers such as large Horton spheres, bullets (both fixed and mobile), smaller cylinders, etc. If such ...

NDMA (National Disaster Management Authority)

•Introduction :- The National Disaster Management Authority (NDMA), headed by the Prime Minister of India, is the Apex Body for Disaster Management in India. The setting up of the NDMA and the creation of an enabling environment for Institutional mechanisms at the State and District levels is mandated by the Disaster Management Act, 2005.This unit describes about NDMA, civil defence and disaster recovery plans of industry and corporate. India envisions the development of an ethos of prevention, mitigation and preparedness and will strive to promote a national resolve to mitigate the damage and destruction caused by natural and man-made disasters, through sustained and collective efforts of all government agencies, non-governmental organizations and people's participation, by adopting a technology-driven, pro-active, multi-hazard and multi-sectoral strategy for building a safer, disaster resilient and dynamic India. The logo of National Disaster Management Authority (ND...

Air sampling

Air sampling : - Basic need of air quality sampling and work environment monitoring and analysis is to find the level of pollution and to work out strategy to reduce it. Need of sampling and monitoring is statutorily suggested by Form no. 37,Rule 12B of the Gujarat Factories Rules. The format calls for identification of airborne contaminants, sampling instruments and methods, number of samples and comparison of measured value with the TWA concentration in 2nd schedule of the Factories Act to assess the working environment also the number of workers exposed to that. Correct record of such workplace monitoring is essential for good health and good housekeeping. Need of sampling and monitoring is also inferred from the types, sources and hazards of air pollutants. Monitoring is more than air sampling or medical examination of a worker. It includes a series of actions to assess the protection necessary. CLICK HERE👉 Environmental air sampling Purpose and types of Air...

Industrial Fire and Safety

Search This Blog